02
Oct

Screen Door Installation

Written by Henry

Screen Door Installation

1)     

Mount the 2 Hinge Bars to the inside door jambs using the hinges and screws provided.

2)

Once the bars are mounted, slide the door that is to be the non-operable door into the Hinge Bar. Place the door in a closed position to square the door and attach the Hinge Bar with 3 screws.

3)

Slide the Astragal over the door, the weather strip should be out. Close the door to determine if the Astragal needs to be notched.

4)
Once the Astragal has been notched (if necessary), slide the operable door into the other hinge bar. Close both doors, space the door and or Astragal as necessary, attach the Astragal and hinge bar with screws provided.

5)

Open the non-operable door and extend the locks on the Astragal. Place a small amount of caulk onto the Astragal locks. Close the door again and once in place, extend the locks. -is will mark where you need to drill for the locks. Using a 7/23 drill, drill the holes where marked.

Comments are closed.